Standing Seam Metal Roofing
Architectural standing seam in Englert and Sheffield profiles. PVDF for premium Bergen roofs, with copper and zinc available for feature work on high-end residential and institutional jobs.
Standing seam roofingSERVICE AREA: HACKENSACK, NJ
Metal Fabrication for Hackensack and Bergen County
U Design Fabricators cuts standing seam, siding, edge metal, and custom architectural trim at its East Orange shop and delivers north to Hackensack, the Bergen County seat. About 14 miles, a short run up. Send the spec.
BERGEN COUNTY, FROM THE EAST ORANGE FLOOR
A metal fabricator Hackensack NJ jobs can order direct
For a metal fabricator Hackensack NJ contractors, architects, and owners can actually reach, the address is East Orange, about 14 miles south. It is a short, easy run north up to the Bergen County seat, which keeps delivery practical and lets a job pull panels and trim from one shop floor instead of a distributor three states away.
Bergen is a premium residential market with institutional and healthcare construction layered on top. Hackensack itself is a long-standing medical and hospital hub. That mix tends to put the detailing front and center, the kind of job where a fascia return or a soffit transition has to read clean, not just function.
U Design fabricates to your spec and supplies the finished metal. The shop does not install. It cuts the panels, the flashing, and the one-off trim, color-matched across the building, and gets them to the Hackensack jobsite ready for your crew to set.
HACKENSACK QUESTIONS
What a Hackensack job tends to ask
How far is the shop from Hackensack?
About 14 miles. The shop is in East Orange and the run up to Hackensack is short and direct, so delivery to a Bergen County jobsite stays practical. Pickup at the shop is open too, which suits a crew already running south of the county.
Do you install the metal in Hackensack?
Fabrication and supply are the focus. U Design cuts standing seam, siding, edge metal, soffit, fascia, and custom trim to your spec and delivers it, ready to set.
Can you color-match the whole building?
Yes, and on a premium Bergen job it is usually the point. When the roof, the wall, the soffit, the fascia, and the trim all come off one shop and one coil source, the finishes line up across the envelope instead of drifting between suppliers.
What finishes do you carry for high-end Bergen work?
About 70 percent of what the shop runs is PVDF, the long-life architectural finish for premium roof and wall panels. For jobs that call for it, the shop also fabricates in copper and zinc, the metals a high-end Hackensack project sometimes specifies for a feature roof or wall.
Do you handle architect-specified detailing?
Yes. One-off custom architectural metal is a core line: fascia returns, transitions, kick-outs, closures, and trim built to a drawing. On the demanding Bergen jobs where the detailing is the whole look, the shop fabricates the pieces a stock catalog will not cover.
Which manufacturers do you fabricate?
Englert, Sheffield, and Drexmet. The profiles and color lines come from those suppliers, so each panel and trim package carries the manufacturer finish warranty that comes with the coil. Hackensack architects working from a manufacturer spec sheet can order to it.
Can you supply a full roof, wall, and trim package together?
Yes. A single order can cover the standing seam, the siding, the soffit and fascia, and the edge metal that ties them together, all color-matched and delivered as one package to the Hackensack site.
Do you work in Portuguese as well as English?
Yes. The shop has more than two decades in metal fabrication and runs in English and Portuguese, so the spec conversation can happen in either.
HOW A HACKENSACK ORDER RUNS
Spec to delivered metal
- 1
Profile, gauge, substrate, finish or color, and quantities, plus the trim and flashing the job needs. An architect's drawing or a manufacturer spec sheet works. If a detail is a one-off, describe it or send a sketch.
- 2
The shop quotes the fabrication and the delivery together, with the Hackensack address on it. The freight is in writing on the order, not a surprise at the end. Lead time is confirmed at quote, not promised blind.
- 3
Panels, edge metal, soffit, fascia, and any custom trim are cut and formed to spec, color-matched off one coil source so the whole envelope holds the same finish.
- 4
The order ships the 14 miles up to the Hackensack jobsite on a schedule that fits where the job sits, or your crew picks it up off the floor in East Orange. Either way the metal arrives ready to set.
WHAT WE FABRICATE FOR HACKENSACK PROJECTS
Five lines off one shop floor
Every Hackensack order pulls from the same five fabrication lines. As a metal fabricator Hackensack NJ jobs order direct, U Design cuts each line to spec and color-matches across the building.
Edge Metal & Flashing
Copings, fascia caps, gravel stops, drip edge, and perimeter flashing, formed to the roof and color-matched. The pieces that make a premium envelope read as one finished system.
Edge metal & flashingMetal Siding Panels
Concealed and exposed-fastener wall panels in the same finish family as the roof above, so wall and roof match on the high-visibility facades a premium Bergen job puts up.
Metal siding panelsCustom Metal Fabrication
One-off architectural metal built to a drawing: fascia returns, transitions, closures, and trim a stock catalog will not cover. The line that carries the detailing on demanding Hackensack jobs.
Custom metal fabricationSoffit & Fascia
Vented and solid soffit with matching fascia, color-matched to the roof and wall so the eave detail finishes clean. Cut to your runs and delivered with the rest of the package.
Soffit & fasciaWHY ORDER FROM A LOCAL SHOP
What 14 miles buys a Bergen job
Matched finishes
Roof, wall, soffit, fascia, and trim come off one shop and one coil source, so the finishes match across the building. On a premium job where the detailing is the point, that consistency is the difference between a clean envelope and a patchwork of near-matches.
A short, practical haul
The shop is about 14 miles south in East Orange, a short run up to Hackensack. Delivery stays practical and pickup off the floor is open, so a crew is not waiting on freight from a distant distributor or eating the cost of a long ship.
A shop you can reach
When a detail on an institutional or high-end residential job needs an answer, you call the shop that cut it. U Design works from your drawing or manufacturer spec, with more than two decades in metal, in English and Portuguese.
Have a Hackensack or Bergen County job?
Send the spec and the jobsite address, and the shop will quote the fabrication and the delivery together. Pickup in East Orange is always open.